# 通讯作者

(1)    Yang Huang, Shaojun Zhu, #Suwen Chen(2023), Deep learning-driven super-resolution reconstruction of two-dimensional explosion pressure fields，Journal of Building Engineering，https://doi.org/10.1016/j.jobe.2023.107620

(2)    陈素文，魏鑫纳，李国强(2024)，Q690D-QT高强钢材的高温动态拉伸力学性能，建筑结构学报，45(1)，DOI：10.14006/j.jzjgxb.2023.0351

(3)    郝小涵，#陈素文，陈志飞，点支单层玻璃面板负高斯曲率冷弯成形稳定性研究，工程力学，10.6052/j.issn.1000-4750.2023.03.0232

(4)    郭鑫，#陈素文(2023)，考虑Mullins效应的硅酮胶本构模型，力学学报, 2023, 55(6): 1308-1318 doi: 10.6052/0459-1879-23-035 

Guo Xin, Chen Suwen. CONSTITUTIVE MODELLING OF SILICONE ADHESIVE CONSIDERING MULLINS EFFECT, Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(6): 1308-1318

(5)    Dejun Zhang, # Suwen Chen, (2023), Flexural performance of Metal-Reinforced Glass Beams: Numerical and Analytical Investigation, Engineering Structures, doi.org/10.1016/j.engstruct.2023.115941

(6)    Yujia Lu, Suinan ZHAO, # Suwen Chen (2023), Compressive buckling performance of multilayer laminated glass columns with different interlayers, Engineering Structures，10.1016/j.engstruct.2023.115701

(7)    Xing Chen, Changzhong Wang, # Suwen Chen, Siyi Yi, Yong LU(2023), Characterization of the Dynamic Mechanical Properties of Low-iron Float Glass through Split-Hopkinson-Pressure-Bar Tests, Construction and Building Materials，10.1016/j.conbuildmat.2022.130083

(8)    Xing Chen; # Suwen Chen; Yukuan Zhang; Zhongqi Wang(2023)，Blast resistance of ionomer-laminated glass and the effect of negative blast pressure，Journal of Structural Engineering，DOI: 10.1061/JSENDH.STENG-11761.

(9)    陈素文，陈志飞，陈星(2023), 中高速加载下夹层玻璃破碎后性能试验研究，建筑结构学报，44（3），102-112

Chen Suwen, Chen Zhifei, Chen Xing (2023), Experimental study on post-fractured performance of laminated glass at medium-to-high strain rates, Journal of Building Structures, 44（3），102-112

(10) 陈素文，章宇宽，#陈星（2023），框支式SGP夹层玻璃抗爆性能的试验和数值模拟研究，建筑结构学报，44（2），206-216

(11) Zhuojun Nan, Aatif Ali Khan, Liming Jiang, Suwen Chen, Asif Usmani (2022), Application of travelling behaviour models for thermal responses in large compartment fires, Fire Safety Journal , doi: https://doi.org/10.1016/j.firesaf.2022.103702.

(12) Aatif Ali Khan, Zhuojun Nan, Liming Jiang, Vinny Gupta, Suwen Chen, et al (2022), Model characterisation of localised burning impact from localised fire tests to travelling fire scenarios, Journal of Building Engineering 54, https://doi.org/10.1016/j.jobe.2022.104601  

(13) Suwen Chen, Zhifei Chen, #Xing Chen, Jens Schneide(2022), Evaluation of the delamination performance of polyvinyl-butyral laminated glass by through-cracked tensile tests, Construction and Building Materials，https://doi.org/10.1016/j.conbuildmat.2022.127914

(14) Fan ZHU, Jidong ZHAO, Roberto BALLARINI, Shitao PENG, Suwen CHEN (2022), Peridynamic modeling of stochastic fractures in bolted glass plates, Mechanics Research Communications, 122, https://doi.org/10.1016/j.mechrescom.2022.103890

(15) Dejun Zhang, # Suwen Chen, Yujia LU, Xing Chen(2022), Quasi-Static Experimental Study on Flexural Performance of Aluminum- Reinforced Laminated Glass Beams, Engineering Structures, doi.org/10.1016/j.engstruct.2022.113993

(16) 陈星，#陈素文（2021），爆炸作用下框支式聚乙烯醇缩丁醛夹层玻璃的破坏模式，同济大学学报, (11)， 1565-1574

(17) 陈素文，陆钰佳，邵筱（2021），考虑温度和加载影响的离子型中间膜拉伸力学性能，同济大学学报，(9), 1265-1274

(18) Xing Chen, Philipp L. Rosendahl, Suwen Chen, Jens Schneider (2021)，On the delamination of polyvinyl butyral laminated glass: Identification of fracture properties from numerical modelling，Construction and Building Materials, 361, 10.1016/j.conbuildmat.2021.124827

(19) Yujia Lu, # Suwen Chen, Xiao Shao (2021), Shear modulus of ionomer interlayer: effects of time, temperature and strain rate, Construction and Building Materials, 302, 10.1016/j.conbuildmat.2021.124224

(20) 陆钰佳，#陈素文，张洋（2021），中高应变率和不同温度下离子型中间膜的拉伸力学性能及本构关系，工程力学，（2），101-109

(21) Xing Chen, # Suwen Chen, Guo-Qiang Li (2021), Experimental investigation on the blast resistance of framed PVB-laminated glass, International Journal of Impact Engineering, (3),  DOI：10.1016/j.ijimpeng.2020.103788

(22) # Suwen Chen, Yujia Lu, Yang Zhang, Xiao Shao (2020), Experimental and analytical study on uniaxial tensile property of ionomer interlayer at different temperatures and strain rates, Construction and Building Materials, 262, 1-18  DOI: 10.1016/j.conbuildmat.2020.120058

(23) # Suwen Chen, Xing Chen, Guo-Qiang Li, Yong Lu (2019) Development of Pressure-Impulse Diagrams for Framed PVB-Laminated Glass Windows, Journal of Structural Engineering, 145(3)

(24) Suwen Chen, # Liming Jiang, Linsen Wu, Yanjun Wang, Asif Usmani (2019), Damage investigation of cementitious fire resistive coatings under complex loading, Construction and Building Materials, 204, 659–674

(25) Youlin XU, Zhilu Wang, Guo-Qiang Li, Suwen Chen, Yongbin Yang(2019), High-speed running maglev trains interacting with elastic transitional viaducts, Engineering Structures, Volume 183, Pages 562-578

(26) Mian Zhou, Liming Jiang, Suwen Chen, Asif Usmani (2019), Residual Fire Resistance of Steel Frames Following Moderate Earthquake - A Case Study, Journal of Constructional Steel Research, Vol. 164, 1-14

(27) Liming Jiang, Suwen Chen, Asif Usmani (2018), Feasibility of dimensionally reduced heat transfer analysis for structural members subjected to localised fire, Advances in Structural Engineering, 21(11), 1708-1722  (IF=1.416)

(28) # Suwen Chen, Xing Chen, Xiqiang WU (2018), The mechanical behaviour of polyvinyl butyral at intermediate strain rates and different temperatures, Construction and Building Materials, 186, 66-79, https://doi.org/10.1016/j.conbuildmat.2018.06.080 (IF=3.169)

(29) # Suwen Chen, Tianyi Liu, Guoqiang Li, Qing Liu, Jianyun Sun (2017), Optimal Design and dynamic impact tests of Removable Bollards, Earthquake Engineering and EngineeringVibration, Volume 16, No. 4, pp 793-802 / cite as [Chen, S., Liu, T., Li, G. et al. Earthq. Eng. Eng. Vib. (2017) 16: 793. https://doi.org/10.1007/s11803-017-0415-8] (IF=0.814) WOS:000414772700009

(30) # Suwen Chen, Xing Chen, Guo-Qiang Li, Yong Lu (2017) A theoretical study on the P-I diagram of framed monolithic glass window subjected to blast loading, Engineering Structures, 150:497-510, DOI: 10.1016/j.engstruct.2017.07.055 WOS:000413125800037

(31) # Suwen Chen, Pei WU (2017), Analytical model for predicting axial compressive behavior of steel reinforced concrete column, Journal of Constructional Steel Research, 128, 649–660, http://dx.doi.org/10.1016/j.jcsr.2016.10.001 (IF=4.1) WOS::000390494700049

(32) Yan-Bo Wang, Guo-Qiang Li, Xu Sun, Suwen Chen, and Le-Tian Hai(2017)，Evaluation and prediction of cyclic response of Q690D steel， Proceedings of the Institution of Civil Engineers - Structures and Buildings 2017 170:11, 788-803

(33) Pei WU, Suwen Chen (2016), Analytical model for the axial bearing capacity of steel reinforced concrete column with high strength materials, STEEL AND ALUMINIUM STRUCTURES (Proceedings of 8th International Conference on Steel and Aluminium Structures (ICSAS), Hongkong China, Dec. 7-9, 2016 (WOS:000406839700119)

(34) # Suwen Chen, Chen-Guang Zhu, Guo-Qiang Li and Yong Lu (2016), Blast test and numerical simulation of point-supported glazing, Advances in Structural Engineering, 19(12), 1841-1854, DOI: 10.1177/1369433216649387 (IF=0.577) WOS:000389610400003 (IF=1.416)

(35) Suwen Chen, Xing Chen, Yan-Bo Wang#, Zhili Lu, Guo-Qiang Li (2016), Experimental and numerical investigations of Q690D H-section columns under lateral cyclic loading, Journal of Constructional Steel Research, Vol. 121, 268–281, http://dx.doi.org/10.1016/j.jcsr.2016.02.015 WOS:000375508600022 (IF=1.702)

(36) Guo-Qiang Li, Zhi-Lu Wang, Suwen Chen, You-Lin Xu (2016)，Field measurements and analyses of environmental vibrations induced by high-speed Maglev，Science of the Total Environment, 568, 1295–1307, http://dx.doi.org/10.1016/j.scitotenv.2016.01.212 WOS:000382258300130 (IF= 3.976)

(37) Ke, Cao, Guo-Qiang Li, Yu Zhang, Suwen Chen, Bo Hu (2016), Orthogonal analysis and optimization of a K4-rating auto-lifting anti-ram bollard system, International Journal of Steel Structures, 16(2), 262-277, DOI: 10.1007/s13296-016-6001-5, WOS:000379535000001

(38) 李国强,王彦博,陈素文,(2015) The Art of Application of High-strength Steel Structures for Buildings in Seismic Zones, Advanced Steel Construction，11(4)，492-506

(39) 陈素文，陆志立，陈星，李国强（2015），Q690D高强钢箱形截面柱的滞回性能，同济大学学报，43（8），1135-1143 EI: 20153801280624

Chen Suwen, Lu Zhili, Chen Xing, Li Guoqiang(2015), Hysterestic Behavior of Q690D High Strength Steel Box-Section Beam Columns, Journal of Tongji University (Natural Science), 43(8), 1135-1143

(40) # Chen Suwen, Jiang Liming, Usmani Asif, Li Guoqiang, Jin Chu (2015)，Damage mechanisms in cementitious coatings on steel members under axial loading, Construction and Building Materials, Vol. 90, 18-35, DOI:10.1016/j.conbuildmat.2015.04.025 WOS:000356743400003，EI: 20152000842741 (IF= 2.421)

(41) 陈素文，吴林森，廖志娟，江黎明（2015），纯拉荷载下厚型钢结构防火涂层破损的评估方法，防灾减灾学报，Vol. 35，No. 1, 36-43

(42) # Chen Suwen, Jiang Liming, Usmani Asif, Li Guoqiang(2015)，Damage mechanisms in cementitious coatings on steel members in bending, Proceedings of the ICE - Structures and Buildings, Vol. 168, No. SB5, 351-369, DOI: 10.1680/stbu.13.00096 (须按全称PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS检索) WOS:000356693100005, EI：20152000845425 (IF=0.429)

(43) 王彦博,李国强,崔巍,陈素文,(2014) Seismic behavior of high strength steel welded beam-column members, Journal of Constructional Steel Research, Journal of Constructional Steel Research 102(11), 245-255 (WOS:000342246000019, EI:20143318063905)

(44) 陈素文，陆志立，李国强，韦明，王彦博，陈星（2014），Q690D高强钢焊接截面柱低周反复加载试验研究，建筑结构学报，35（12），97-103 (EI: 20150500468732)

(45) 陈素文, 吴西强, 戎文杰（2014），低应变率下聚乙烯醇缩丁醛的拉伸力学性能，高分子材料科学与工程，30(1), 66-71, 77 （EI：20141217496749）

Suwen Chen, Xiqiang Wu, Wenjie Rong(2014), Tensile Property of Polyvinyl Butyral at Low Strain Rate, POLYMER MATERIALS SCIENCE AND ENGINEERING, 30(1), 66-71, 77 ( in chinese) （EI：20141217496749）

(46) 李国强，葛杰，陈素文（2014），建筑玻璃板在爆炸荷载作用下的破损性能（I）－理论模型，土木工程学报，47（2），23-29 （EI：20141017431169）

(47) 葛杰，李国强，陈素文（2014），建筑玻璃板在爆炸荷载作用下的破损性能（II）－试验验证，土木工程学报，47（3），59-68 （EI：20141417541521）

(48) 葛杰，李国强，陈素文(2013)，高应变率加载下玻璃板碎片尺寸的理论模型，振动与冲击，32（1），69-72转98 （EI: 20131016087546）

(49) 李国强，瞿海雁，杨涛春，陆勇，陈素文（2013），钢管混凝土柱抗爆性能试验研究，建筑结构学报，34（12），69-76

(50) 李国强，王彦博，陈素文*等（2013），Q460C高强度结构钢焊接H型和箱形截面柱低周反复加载试验研究，建筑结构学报，34（3），80-86 (EI: 20131416174910)

(51) Ya Wei, Suwen Chen & Francis T.K. Au (2013): Failure analysis of four-point-supported glass panels subjected to blast loading, HKIE Transactions, 20:1, 62-70 （EI：20140917364404）

(52) 陈素文，朱晨光，李国强，葛杰（2012），点支式玻璃幕墙爆炸试验研究及有限元分析，建筑结构学报，33（12），99-105 (EI: 20130215895250)

Suwen Chen, Chenguang Zhu, Guoqing Li, Jie Ge (2012), Blast test and finite element analysis of point-supported glass curtain wall, Journal of Building Structures, v 33, n 12, p 99-105 ( in chinese)

(53) 葛杰,李国强,陈素文(2012)，Theoretical and experimental investigation on fragment behavior of architectural glass panel under blast loading，Engineering Failure Analysis, 76, 293-303 (EI: 20124515651811 , WOS:, 000313843700030) DOI: 10.1016/j.engfailanal.2012.07.022

(54) 王彦博,李国强,陈素文(2012)，The assessment of residual stresses in welded high strength steel box sections，Journal of Constructional Steel Research，76, 93-99 (000306033300009, 20122415107748)

(55) 王彦博,李国强,陈素文,孙飞飞（2012），Experimental and Numerical Study on the Behavior of Axially Compressed High Strength Steel Columns with H-section，ENGINEERING STRUCTURES，Vol. 43，p149-159

(56) 李国强,王开强,刘玉姝,陈素文(2012)，Cetenary action of restrained steel beam against progressive collapse of steel frameworks，Journal of Central South University，p537-546 （SCI: 000299928600034）

(57) 闫晓雷,李国强,陈素文(2012)，Q460高强钢焊接箱型压弯构件极限承载力实验研究，土木工程学报，Vol. 45, No. 8, 1-7

(58) 王彦博，李国强，陈素文，孙飞飞(2012)，Q460钢焊接H形柱轴心受压极限承载力试验研究，土木工程学报，Vol. 45, No.6, 58-64 

(59) 戎文杰，陈素文(2012)，国内外PVB材性研究，高分子通报，No.5，82-88

(60) 廖志娟，陈素文，江黎明，吴林森(2012)，纯弯荷载下厚型钢结构防火涂层破损的试验研究和数值分析，防灾减灾学报，Vol. 32，No. 2, 197-204

(61) 李国强，王彦博，陈素文(2012)，-高强钢焊接箱形柱轴心受压极限承载力试验研究，建筑结构学报，Vol. 33, No. 3, 8-14

(62) 王彦博，李国强，陈素文，孙飞飞(2012)，Q460高强钢焊接箱形柱轴心受压力学性能数值分析，工业建筑，Vol. 42, NO.1, 26-31 转69

(63) 孙飞飞，杨芳，李国强，陈素文 (2012)，高强热轧H型钢悬臂梁低周反复试验研究，工业建筑，Vol. 42, NO.1, 46-50

(64) 李国强，王彦博，陈素文，孙飞飞(2011)，Q 460高强钢焊接箱形柱轴心受压极限承载力参数分析，建筑结构学报，Vol. 32, No. 11, 149-155

(65) Haiyan Qu, Guoqiang Li, Suwen Chen＊, Jianyun Sun, Mete. A. Sozen(2011), Analysis of Circular Concrete-Filled Steel Tube Specimen under Lateral Impact, Advances in Structural Engineering, Vol. 14, No.5, 941-951(SCI: 000296248700016,EI: 12332677) (IF=0.577)

(66) 瞿海雁，李国强，孙建运，陈素文(2011)， 侧向冲击作用下钢管混凝土构件的简化分析模型，同济大学学报，Vol. 39, No.1,35-41

(67) G. Q. LI, X. DING and S. W. CHEN (2010), On Inter-storey drift limitation of steel-concrete hybrid structures for tall buildings, Journal of Earthquake and Tsunami, Vol. 4, No. 1 (2010) 1–7 （SCI：000275714100001）

(68) Chen Su-Wen，Chu Jin，Li Guo-Qiang，A study on damage mechanism of thick fireproof coating for steel member subjected to monotonic loading，Structures in Fire - Proceedings of the Sixth International Conference, SiF'10，June 2, 2010 - June 4, 2010，East Lansing, MI, United states，130-138 （EI:20103413181782,  WOS:000282623900017）

(69) 周健，陈素文*，苏骏，李国强，孙建运，杨涛春，魏亚，刘春霖. 虹桥综合交通枢纽结构连续倒塌分析研究.建筑结构学报. 2010,31(5):174-180.（EI收录，20102413003522）

(70) 李国强; 司林军; 陈素文; 王开强; 模拟钢框架去柱反应分析方法研究，振动.测试与诊断，30(2),2010年4月，184-188 （EI: 20102413003930）

(71) 李国强，杨涛春，陈素文，2009，Behavior and Simplified analysis of steel-concrete composite beams subjected to localized blast loading, Structural Engineering and Mechanics, Vol.32, No. 2, 337-350（SCI：000266677300010，EI：20092812174942收录）

(72) 李国强，王卫永，陈素文，A simple approach for modeling fire-resistance of steel columns with locally damaged fire protection, Engineering Structures, Vol. 21, No. 3, 2009，p 617-622 （SCI：000263664000001，EI：20090511887793 收录）

(73) 陈素文 李国强，2008年，地震次生火灾的研究进展，自然灾害学报，17(5)，120~126

(74) 李国强，王卫永，陈素文，火灾下防火涂料破损后钢柱的极限承载力，工程力学，2008，25(12)，72~78（EI：20090311862414）

(75) Xu, YL, Chen, SW (Chen, SW), Zhang, RC（2003）, Modal identification of Di Wang Building under Typhoon York using the Hilbert-Huang transform method, STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 12(1), 21-47 (SCI：000221061100002)

(76) 李国强，郝坤超，陆烨，陈素文（1999），Flexibility approach for damage identification of cantilever-type structures with bending and shear deformation，Computers & Structures， 73(6):565-572