陈素文

职称:教授

学位:博士学位

    研究方向

    土木工程和电力设施的爆炸安全防护;
    钢结构多重灾害防御
    玻璃结构
    AI在工程结构抗爆中的应用






    研究项目

    国家级科研课题:

    主持

    1)      国家自然科学基金面上项目(52278526),氯盐侵蚀钢筋混凝土桥墩柱的爆炸破损机理和评估方法2023.01-2026.12,负责人

    2)    国家重点研发计划重点专项课题(2019YFB2102701),  城市地面基础设施群运行保障关键技术研究与应用示范,2020.1-2022.12,子课题负责人

    3)      国家重点研发计划重点专项课题(2017YFC0703808),建筑钢结构防火防腐装饰一体化防护新技术与产品,2017.7-2020.12课题负责人

    4)      国家自然科学基金面上项目(51678448),框支式SGP夹层玻璃幕墙的抗爆性能和破损机制研究,2017.01-2020.12,负责人

    5)      英国皇家工程院牛顿合作科研计划,Fire resistance of tall steel frame buildings in the context of resilient infrastructure and communities2015.2-2016.9,负责人

    6)      国家自然科学基金面上项目51278365),爆炸作用下点支式玻璃幕墙的破损机制和模式研究,2013.01-2016.12,负责人

    7)      国家自然科学基金青年项目(50808143), 地震作用下钢构件厚型防火涂层的破损机理研究,2009.01-2011.12,负责人

    8)     十二五科技支撑计划,   高速磁浮环境振动与空间线形技术研究,2013.10-2015.12子课题负责人

    9)      十一五科技支撑计划  高效钢结构设计关键技术研究, 2007-2010, 子课题负责人

    10)      十一五科技支撑计划,  高速磁浮轨道结构列车荷载设计参数,上海磁浮交通发展有限公司,2008-2009子课题负责人

    11)     863”计划高速磁浮交通技术重大专项,高速磁浮轨道结构设计使用年限的研究,2007-2008,上海磁浮交通工程技术研究中心,子课题负责人

      主要参与

    1)        高层建筑钢结构抵抗火灾与爆炸下连续性倒塌的鲁棒性研究,国家自然科学基金重大国际合作项目(51120185001),2012-2016,排名第2

    2)        强地震作用下超高层建筑损伤机理及破坏全过程研究,国家自然科学基金重点项目子课题(90815029),2009-2012,排名第2

    3)        “土木工程防灾”创新群体及后续研究,参与人

    4)        863”计划高速磁浮交通技术重大专项子课题—轨道结构可靠度及抗震设计标准的研究,上海磁浮交通工程技术研究中心,主要完成人

    5)         863”计划高速磁浮交通技术重大专项子课题—高速磁浮轨道结构设计方法的研究,上海磁浮交通工程技术研究中心,主要完成人

    6)        世博场馆大空间结构安全保障关键技术,上海市科委/科技部,主要完成人

     

    主要横向科研项目

    1)        大型变压器抗爆性能提升技术的数值仿真分析,特变电工股份有限公司,负责人

    2)        乌鲁木齐国际机场北区改扩建工程防恐技术研究,华东建筑设计研究院有限公司,负责人

    3)        乌鲁木齐机场改扩建工程幕墙抗爆性能数值分析,天浩建设集团有限公司,负责人

    4)        太阳能光热发电吸热塔消能减振结构体系研究,中国电力工程顾问集团西北电力设计院,负责人

    5)        超高层建筑玻璃幕墙抗爆性能评估和设计研究,同济大学建筑设计院,负责人

    6)        建筑外围防撞柱系统关键技术研究,中国建筑股份有限公司技术中心,主要完成人

    7)        钢结构设计美国标准及菲律宾标准咨询及审核,华电重工股份有限公司,主要完成人

    8)        宝钢低屈服点钢BLY225TJII型屈曲约束支撑中的应用,主要完成人

    9)        上海市东方体育中心屈曲约束支撑低周反复荷载试验,上海市机械施工有限公司,主要完成人

    10)     宝钢低屈服点钢BLY160TJI型屈曲约束支撑中的应用,宝山钢铁股份有限公司,主要完成人

    11)     Life Shield Clear Panels with Cable Catchers 数值模拟,主要完成人

    12)     上海中心关键构件抗爆性能研究和防连续倒塌分析,主要完成人

    13)     电力主厂房中高强钢及防屈曲支撑的应用分析研究,主要完成人

    14)     虹桥枢纽工程东交通广场的连续倒塌分析,主要完成人

    15)     上海世博中心屈曲约束支撑低周反复荷载试验,主要完成人

    16)     美国纽约世贸中心大楼的倒塌原因分析,美国NSF,主要完成人

    17)     郑州国际会展中心会议中心减振器的测试,主要完成人

    18)     上海环球金融中心电缆吊装具验算 ,主要完成人

    19)     沪东造船厂技术中心大楼的分析与设计,25层,98.8米高,总面积31265平方米,钢结构设计


    出版论著

    (1)    Suwen Chen, Xing Chen, Yujia Lu, Xin Guo, Siyi Yi, Yu Lu(2025), Towards Blast Safety of Glass Facades- Research Advances and Prospects, Thin-walled Structures, https://doi.org/10.1016/j.tws.2025.113213

    (2)    Bingxuan Zhou, #Xing Chen, #Suwen Chen (2025)Failure mechanism and residual load bearing capacity of blast-loaded reinforced concrete bridge column considering bottom corrosion effectStructures, https://doi.org/10.1016/j.istruc.2025.108668

    (3)    Xin Guo, Bo Chen, #Suwen Chen(2024), Multiscale experimental characterization and physical-based constitutive modeling of silicone adhesive, Construction and Building Materials10.1016/j.conbuildmat.2024.137946

    (4)    周秉轩,陈星,#陈素文(2024),非均匀锈蚀对RC柱受爆响应的影响机理,工程力学

    (5)    Dejun Zhang, # Suwen Chen (2024), A finite difference method on crack resistance of reinforced glass beam with non-linear adhesive, Composite Structures, https://doi.org/10.1016/j.compstruct.2024.118335

    (6)    Siyi Yi, #Suwen Chen (2024), Flaw characteristics of architectural glass and long-term strength prediction model, Glass Structures & Engineering, https://doi.org/10.1007/s40940-024-00253-4

    (7)    Suwen Chen, Xinna Wei, Guo-qiang LI (2024), Strain rate-temperature effects and Constitutive models for Q690D QT Steel, Journal of Constructional Steel Research, https://doi.org/10.1016/j.jcsr.2024.108728  

    (8)    陈素文,魏鑫纳,李国强(2024)Q690D-QT高强钢材的高温动态拉伸力学性能,建筑结构学报,45(1)DOI10.14006/j.jzjgxb.2023.0351

    (9)    陆新征,韩进,韩博,陈素文,廖文杰(2023), 基于规则学习与编码的剪力墙智能设计优化,东南大学学报,53(6), 1199-1208, DOI10.3969/j.issn.1001-0505.2023.06.027

    (10) Yang Huang, Shaojun Zhu, #Suwen Chen(2023), Deep learning-driven super-resolution reconstruction of two-dimensional explosion pressure fields, Journal of Building Engineeringhttps://doi.org/10.1016/j.jobe.2023.107620

    (11) Zhiyuan Wang, Junjin Liu, Jianhui Li and Suwen Chen(2023), Whole-life wind-induced deflection of insulating glass unitsWind and Structures37(4), p 289-302DOI: https://doi.org/10.12989/was.2023.37.4.289

    (12) 郝小涵,#陈素文,陈志飞,点支单层玻璃面板反双曲冷弯成形稳定性研究,工程力学,10.6052/j.issn.1000-4750.2023.03.0232

    (13) 郭鑫,#陈素文(2023),考虑Mullins效应的硅酮胶本构模型,力学学报, 2023, 55(6): 1308-1318 doi: 10.6052/0459-1879-23-035 

    Guo Xin, Chen Suwen. CONSTITUTIVE MODELLING OF SILICONE ADHESIVE CONSIDERING MULLINS EFFECT, Chinese Journal of Theoretical and Applied Mechanics, 2023, 55(6): 1308-1318

    (14) Dejun Zhang, # Suwen Chen, (2023), Flexural performance of Metal-Reinforced Glass Beams: Numerical and Analytical Investigation, Engineering Structures, doi.org/10.1016/j.engstruct.2023.115941

    (15) Yujia Lu, Suinan ZHAO, # Suwen Chen (2023), Compressive buckling performance of multilayer laminated glass columns with different interlayers, Engineering Structures10.1016/j.engstruct.2023.115701

    (16) Xing Chen, Changzhong Wang, # Suwen Chen, Siyi Yi, Yong LU(2023), Characterization of the Dynamic Mechanical Properties of Low-iron Float Glass through Split-Hopkinson-Pressure-Bar Tests, Construction and Building Materials10.1016/j.conbuildmat.2022.130083

    (17) Xing Chen; # Suwen Chen; Yukuan Zhang; Zhongqi Wang(2023)Blast resistance of ionomer-laminated glass and the effect of negative blast pressureJournal of Structural EngineeringDOI: 10.1061/JSENDH.STENG-11761.

    (18) 陈素文,陈志飞,陈星(2023), 中高速加载下夹层玻璃破碎后性能试验研究,建筑结构学报,443),102-112

    (19) 陈素文,章宇宽,#陈星(2023),框支式SGP夹层玻璃抗爆性能的试验和数值模拟研究,建筑结构学报,442),206-216

    (20) Zhuojun Nan, Aatif Ali Khan, Liming Jiang, Suwen Chen, Asif Usmani (2022), Application of travelling behaviour models for thermal responses in large compartment fires, Fire Safety Journal , doi: https://doi.org/10.1016/j.firesaf.2022.103702.

    (21) Aatif Ali Khan, Zhuojun Nan, Liming Jiang, Vinny Gupta, Suwen Chen, et al (2022), Model characterisation of localised burning impact from localised fire tests to travelling fire scenarios, Journal of Building Engineering 54, https://doi.org/10.1016/j.jobe.2022.104601  

    (22) Suwen Chen, Zhifei Chen, #Xing Chen, Jens Schneider(2022), Evaluation of the delamination performance of polyvinyl-butyral laminated glass by through-cracked tensile tests, Construction and Building Materialshttps://doi.org/10.1016/j.conbuildmat.2022.127914

    (23) Fan ZHU, Jidong ZHAO, Roberto BALLARINI, Shitao PENG, Suwen CHEN (2022), Peridynamic modeling of stochastic fractures in bolted glass plates, Mechanics Research Communications, 122, https://doi.org/10.1016/j.mechrescom.2022.103890

    (24) Dejun Zhang, # Suwen Chen, Yujia LU, Xing Chen(2022), Quasi-Static Experimental Study on Flexural Performance of Aluminum- Reinforced Laminated Glass Beams, Engineering Structures, doi.org/10.1016/j.engstruct.2022.113993

    (25) 陈星,#陈素文(2021),爆炸作用下框支式聚乙烯醇缩丁醛夹层玻璃的破坏模式,同济大学学报, (11) 1565-1574

    (26) 陈素文,陆钰佳,邵筱(2021),考虑温度和加载影响的离子型中间膜拉伸力学性能,同济大学学报,(9), 1265-1274

    (27) Xing Chen, Philipp L. Rosendahl, Suwen Chen, Jens Schneider (2021)On the delamination of polyvinyl butyral laminated glass: Identification of fracture properties from numerical modellingConstruction and Building Materials, 361, 10.1016/j.conbuildmat.2021.124827

    (28) Yujia Lu, # Suwen Chen, Xiao Shao (2021), Shear modulus of ionomer interlayer: effects of time, temperature and strain rate, Construction and Building Materials, 302, 10.1016/j.conbuildmat.2021.124224 October, 2021

    (29) 陆钰佳,#陈素文,张洋(2021),中高应变率和不同温度下离子型中间膜的拉伸力学性能及本构关系,工程力学,(2),101-109

    (30) Xing Chen, # Suwen Chen, Guo-Qiang Li (2021), Experimental investigation on the blast resistance of framed PVB-laminated glass, International Journal of Impact Engineering, (3),  DOI10.1016/j.ijimpeng.2020.103788  

    (31) # Suwen Chen, Yujia Lu, Yang Zhang, Xiao Shao (2020), Experimental and analytical study on uniaxial tensile property of ionomer interlayer at different temperatures and strain rates, Construction and Building Materials, 262, 1-18  DOI: 10.1016/j.conbuildmat.2020.120058

    (32) # Suwen Chen, Xing Chen, Guo-Qiang Li, Yong Lu (2019) Development of Pressure-Impulse Diagrams for Framed PVB-Laminated Glass Windows, Journal of Structural Engineering, 145(3)

    (33) Suwen Chen, # Liming Jiang, Linsen Wu, Yanjun Wang, Asif Usmani (2019), Damage investigation of cementitious fire resistive coatings under complex loading, Construction and Building Materials, 204, 659–674

    (34) Youlin XU, Zhilu Wang, Guo-Qiang Li, Suwen Chen, Yongbin Yang(2019), High-speed running maglev trains interacting with elastic transitional viaducts, Engineering Structures, Volume 183, Pages 562-578

    (35) Mian Zhou, Liming Jiang, Suwen Chen, Asif Usmani (2019), Residual Fire Resistance of Steel Frames Following Moderate Earthquake - A Case Study, Journal of Constructional Steel Research, Vol. 164, 1-14

    (36) Liming Jiang, Suwen Chen, Asif Usmani (2018), Feasibility of dimensionally reduced heat transfer analysis for structural members subjected to localised fire, Advances in Structural Engineering, 21(11), 1708-1722

    (37) # Suwen Chen, Xing Chen, Xiqiang WU (2018), The mechanical behaviour of polyvinyl butyral at intermediate strain rates and different temperatures, Construction and Building Materials, 186, 66-79, https://doi.org/10.1016/j.conbuildmat.2018.06.080

    (38) # Suwen Chen, Tianyi Liu, Guoqiang Li, Qing Liu, Jianyun Sun (2017), Optimal Design and dynamic impact tests of Removable Bollards, Earthquake Engineering and EngineeringVibration, Volume 16, No. 4, pp 793-802 / cite as [Chen, S., Liu, T., Li, G. et al. Earthq. Eng. Eng. Vib. (2017) 16: 793. https://doi.org/10.1007/s11803-017-0415-8]

    (39) # Suwen Chen, Xing Chen, Guo-Qiang Li, Yong Lu (2017) A theoretical study on the P-I diagram of framed monolithic glass window subjected to blast loading, Engineering Structures, 150:497-510, DOI: 10.1016/j.engstruct.2017.07.055

    (40) # Suwen Chen, Pei WU (2017), Analytical model for predicting axial compressive behavior of steel reinforced concrete column, Journal of Constructional Steel Research, 128, 649–660, http://dx.doi.org/10.1016/j.jcsr.2016.10.001 Yan-Bo Wang, Guo-Qiang Li, Xu Sun, Suwen Chen, and Le-Tian Hai(2017)Evaluation and prediction of cyclic response of Q690D steel Proceedings of the Institution of Civil Engineers - Structures and Buildings 2017 170:11, 788-803

    (41) # Suwen Chen, Chen-Guang Zhu, Guo-Qiang Li and Yong Lu (2016), Blast test and numerical simulation of point-supported glazing, Advances in Structural Engineering, 19(12), 1841-1854, DOI: 10.1177/1369433216649387

    (42) Suwen Chen, Xing Chen, Yan-Bo Wang#, Zhili Lu, Guo-Qiang Li (2016), Experimental and numerical investigations of Q690D H-section columns under lateral cyclic loading, Journal of Constructional Steel Research, Vol. 121, 268–281, http://dx.doi.org/10.1016/j.jcsr.2016.02.015

    (43) Guo-Qiang Li, Zhi-Lu Wang, #Suwen Chen, You-Lin Xu (2016)Field measurements and analyses of environmental vibrations induced by high-speed MaglevScience of the Total Environment, 568, 1295–1307, http://dx.doi.org/10.1016/j.scitotenv.2016.01.212

    (44) 李国强,王彦博,陈素文,(2015) The Art of Application of High-strength Steel Structures for Buildings in Seismic Zones, Advanced Steel Construction11(4)492-506

    (45) 陈素文,陆志立,陈星,李国强(2015),Q690D高强钢箱形截面柱的滞回性能,同济大学学报,438),1135-1143

    (46) # Chen Suwen, Jiang Liming, Usmani Asif, Li Guoqiang, Jin Chu (2015)Damage mechanisms in cementitious coatings on steel members under axial loading, Construction and Building Materials, Vol. 90, 18-35, DOI:10.1016/j.conbuildmat.2015.04.025

    (47) 陈素文,吴林森,廖志娟,江黎明(2015),纯拉荷载下厚型钢结构防火涂层破损的评估方法,防灾减灾学报,Vol. 35No. 1, 36-43

    (48) # Chen Suwen, Jiang Liming, Usmani Asif, Li Guoqiang(2015)Damage mechanisms in cementitious coatings on steel members in bending, Proceedings of the ICE - Structures and Buildings, Vol. 168, No. SB5, 351-369, DOI: 10.1680/stbu.13.00096

    (49) 王彦博,李国强,崔巍,陈素文,(2014) Seismic behavior of high strength steel welded beam-column members, Journal of Constructional Steel Research, Journal of Constructional Steel Research 102(11), 245-255

    (50) 陈素文,陆志立,李国强等(2014),Q690D高强钢焊接截面柱低周反复加载试验研究,建筑结构学报,3512),97-103

    (51) 陈素文, 吴西强, 戎文杰(2014),低应变率下聚乙烯醇缩丁醛的拉伸力学性能,高分子材料科学与工程,30(1), 66-71, 77

    (52) 李国强,葛杰,陈素文(2014),建筑玻璃板在爆炸荷载作用下的破损性能(I)-理论模型,土木工程学报,472),23-29

    (53) 葛杰,李国强,陈素文(2014),建筑玻璃板在爆炸荷载作用下的破损性能(II)-试验验证,土木工程学报,473),59-68

    (54) 葛杰,李国强,陈素文(2013),高应变率加载下玻璃板碎片尺寸的理论模型,振动与冲击,321),69-7298

    (55) 李国强,瞿海雁,杨涛春,陆勇,陈素文(2013),钢管混凝土柱抗爆性能试验研究,建筑结构学报,3412),69-76

    (56) 李国强,王彦博,#陈素文等(2013),Q460C高强度结构钢焊接H型和箱形截面柱低周反复加载试验研究,建筑结构学报,343),80-86

    (57) Ya Wei, Suwen Chen & Francis T.K. Au (2013): Failure analysis of four-point-supported glass panels subjected to blast loading, HKIE Transactions, 20:1, 62-70

    (58) 陈素文,朱晨光,李国强,葛杰(2012),点支式玻璃幕墙爆炸试验研究及有限元分析,建筑结构学报,3312),99-105

    (59) 葛杰,李国强,陈素文(2012)Theoretical and experimental investigation on fragment behavior of architectural glass panel under blast loadingEngineering Failure Analysis, 76, 293-303 DOI: 10.1016/j.engfailanal.2012.07.022

    (60) 王彦博,李国强,陈素文(2012)The assessment of residual stresses in welded high strength steel box sectionsJournal of Constructional Steel Research76, 93-99

    (61) 王彦博,李国强,陈素文,孙飞飞(2012),Experimental and Numerical Study on the Behavior of Axially Compressed High Strength Steel Columns with H-sectionEngineering StructuresVol. 43p149-159

    (62) 李国强,王开强,刘玉姝,陈素文(2012)Catenary action of restrained steel beam against progressive collapse of steel frameworksJournal of Central South Universityp537-546

    (63) 闫晓雷,李国强,陈素文(2012)Q460高强钢焊接箱型压弯构件极限承载力实验研究,土木工程学报,Vol. 45, No. 8, 1-7

    (64) 王彦博,李国强,陈素文,孙飞飞(2012)Q460钢焊接H形柱轴心受压极限承载力试验研究,土木工程学报,Vol. 45, No.6, 58-64 

    (65) 戎文杰,陈素文(2012),国内外PVB材性研究,高分子通报,No.582-88

    (66) 廖志娟,陈素文,江黎明,吴林森(2012),纯弯荷载下厚型钢结构防火涂层破损的试验研究和数值分析,防灾减灾学报,Vol. 32No. 2, 197-204

    (67) 李国强,王彦博,陈素文(2012)-高强钢焊接箱形柱轴心受压极限承载力试验研究,建筑结构学报,Vol. 33, No. 3, 8-14

    (68) 王彦博,李国强,陈素文,孙飞飞(2012)Q460高强钢焊接箱形柱轴心受压力学性能数值分析,工业建筑,Vol. 42, NO.1, 26-31 69

    (69) 李国强,王彦博,陈素文,孙飞飞(2011)Q 460高强钢焊接箱形柱轴心受压极限承载力参数分析,建筑结构学报,Vol. 32, No. 11, 149-155

    (70) Haiyan Qu, Guoqiang Li, #Suwen Chen, Jianyun Sun, Mete. A. Sozen(2011), Analysis of Circular Concrete-Filled Steel Tube Specimen under Lateral Impact, Advances in Structural Engineering, Vol. 14, No.5, 941-951

    (71) 瞿海雁,李国强,孙建运,陈素文(2011) 侧向冲击作用下钢管混凝土构件的简化分析模型,同济大学学报,Vol. 39, No.1,35-41

    (72) G. Q. LI, X. DING and S. W. CHEN (2010), On Inter-storey drift limitation of steel-concrete hybrid structures for tall buildings, Journal of Earthquake and Tsunami, Vol. 4, No. 1 (2010) 1–7

    (73) 周健,#陈素文,苏骏,李国强,孙建运,杨涛春,魏亚,刘春霖. 虹桥综合交通枢纽结构连续倒塌分析研究.建筑结构学报. 2010,31(5):174-180.

    (74) 李国强; 司林军; 陈素文; 王开强; 模拟钢框架去柱反应分析方法研究,振动.测试与诊断30(2),20104月,184-188

    (75) 李国强,杨涛春,陈素文,2009Behavior and Simplified analysis of steel-concrete composite beams subjected to localized blast loading, Structural Engineering and Mechanics, Vol.32, No. 2, 337-350

    (76) 李国强,王卫永,陈素文,A simple approach for modeling fire-resistance of steel columns with locally damaged fire protection, Engineering Structures, Vol. 21, No. 3, 2009p 617-622

    (77) 陈素文 李国强,2008年,地震次生火灾的研究进展,自然灾害学报,17(5)120~126

    (78) 李国强,王卫永,陈素文,火灾下防火涂料破损后钢柱的极限承载力,工程力学,200825(12)72~78

    (79) Lee, G.C., Chen, S., Li G.Q., Tong M.(2004), On Performance-based Analysis of Buildings for Multi-Hazard Mitigation, International Journal of Steel Structures, 4(4), 231-238

    (80) Xu, YL, Chen, SW, Zhang, RC2003, Modal identification of Di Wang Building under Typhoon York using the Hilbert-Huang transform method, STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 12(1), 21-47


    授权专利

    1)    陈素文,杜干,郭泽琛,谢强,基于薄弱点破坏的油浸式变压器泄爆的方法,202110779852.5,2022年9月16日

    2)张德峻,陈素文,装配式后张法预应力钢索加强玻璃梁,发明专利ZL 202011360038.12021914

    3)  张德峻,陈素文,铝合金棒材和玻璃纤维增强聚酯板受弯加强型玻璃梁构件,发明专利ZL201810323127.52020214

    4)  陈素文,孙佳兴,傅天正,王梁坤,一种新型斜交网格体系节点,发明专利ZL201710148722.520181221

    5)  李国强、李六连、陈素文,用于框架结构连续性倒塌装配式去柱装置,发明专利ZL201510809059.X201832

    6)   陈素文,李程蔚,郑毅,一种3D打印建筑施工技术和装置,发明专利ZL201410176698.2201632

    7)   陈素文,戎文杰,赵昕,吴西强. 夹胶玻璃PVB试验膜制作方法,发明专利ZL201310074357.X201524

    8)   陈素文,孙飞飞,戎文杰,丁瑞,吴西强. 不可压缩材料的直接拉伸试验夹具, 发明专利ZL201310074358.42015722

    9)   陈素文,刘天一,胡波,李国强,孙建运,浅基础可移动式防撞装置,发明专利ZL201210259944.12015429

    10)   曹轲,李国强,陈素文,自动升降式防撞柱系统,发明专利ZL201310457540.82015

    11)   孙飞飞,陈素文,摩擦型有限跷动减震柱,发明专利ZL200810201593.22010128


    其他成果

    /参编标准

    1)        T/CECS736-2020 民用建筑防爆设计规范,中国工程建设标准协会标准

    2)        CECS 392-2021 建筑结构抗倒塌设计规程,中国工程建设标准协会标准

    3)        T/CECS24-2020 钢结构防火涂料应用技术规范,中国工程建设标准协会标准

    4)        DG/TJ 08-2350-2021J 15559-2021),大跨度建筑空间结构抗连续倒塌设计标准,上海市工程建设规范

    5)        T/CSCS 018-2022装配式建筑钢结构防腐蚀涂装技术标准,中国钢结构协会标准

    6)        NB/T 11166-2023,太阳能热发电厂吸热塔结构设计规范,中华人民共和国能源行业标准

    7)        T/ASSCMQ01-2021座地式全玻璃幕墙技术标准,上海市建筑学会标准

    8) T/CSCS 049-2023 《建筑裸露钢结构外观品质分级技术标准》,中国钢结构协会标准


    会议报告


    Chen Suwen (2023), Research progress on blast analysis and safety of glass facades, The 9th International Conference on Thin-walled Structures, Nov. 29-Dec.1, 2023, Sydney, Australia, 大会特邀报告

最后更新时间:--
Copyright © 2020 civileng.tongji.edu.cn 同济大学土木工程学院 All rights reserved.
地址:上海市四平路1239号同济大学土木工程学院    
邮编:200092