[43] “Generalised component method for bolted bearing type connections incorporating block shear failure”, Journal of Constructional Steel Research, 2024, Vol. 220, pp 108849, (J. Zhou, K. Rasmussen, S. Yan*, G. Deierlein, H. Zhang).

[42] “Measurement of strengths and fracture initiation strains of weld metal and HAZ in steel joints using miniature coupons”, Engineering Fracture Mechanics, 2024, Vol. 307, pp 110293, (X. Liu, S. Yan, J. Zhou, K. Rasmussen, G. Deierlein).

[41] “Generalised component method for bolted bearing type connections”, Steel Construction, 2024, Vol, 17(3), pp 118~130, (J. Zhou, S. Yan*, H. Zhang, K. Rasmussen, G. Deierlein).

[40] “Behaviour of in-service CHS gap K-joints strengthened with external stiffeners”, Thin-Walled Structures, 2024, Vol. 200, pp 111897, (J. Lyu, S. Yan*, X. Zhao, X. Chen, X. Wu, X. Xu, F. Gao).

[39] “A simplified method for the stress analysis of underground transfer structures crossing multiple subway tunnels”, Computer Modeling in Engineering & Sciences, 2024, Vol. 139, no. 3, pp 2893~2915, (S. Yan, D. Geng*, N. Dai, M. Long, Z. Bai), (WOS: 001195620100008).

[38] “Stiffness model for embedded steel column bases considering the effects of axial force and constraint of base plate”, Journal of Harbin Institute of Technology, 2024, Vol. 56, No. 2, pp 18~27, (X. Zhao, X. Xu, S. Yan*), (in Chinese, EI index), (AN: 20241015695217).

[37] “Collapse-resisting mechanism and damage propagation pattern of suspended-domes following sudden cable loss”, Journal of Constructional Steel Research, 2024, Vol. 213, pp 108338, (X. Zhao, Z. Xu, S. Yan*), (WOS:001123628900001).

[36] “A comparison of damage effectiveness of reinforced concrete beams by single-point and three-point array damage patterns”, Acta Armamentarii, 2023, Vol. 44, No. 12, pp 3851~3861, (L. Xia, W. Wu*, A. Pan, Y. Wang, Q. Wang, S. Yan), (in Chinese, EI index), (AN: 20240415420905).

[35] “Progressive-collapse mechanism of suspended-dome structures subjected to sudden cable rupture”, Buildings, 2023, Vol. 13, pp 1533, (Z. Xu*, S. Yan), (WOS: 001014128300001).

[34] “Mechanical model for the full range behaviour of bolted T-stubs”, Journal of Constructional Steel Research, 2023, Vol. 200, pp 107652, (J. Lyu, S. Yan*, S. He, X. Zhao, K. Rasmussen), (WOS: 000893211100004).

[33] “Buckling resistance of steel circular tubes strengthened by welding cover plates”, Journal of Constructional Steel Research, 2022, Vol. 199, pp 107631, (S. Yan, J. Lyu, A. Wu*), (WOS: 000879214500003).

[32] “Performance evaluation of axial-loaded circular steel tubes strengthened by welding under service load”, Engineering Structures, 2022, Vol. 271, pp 114948, (X. Zhao, J. Lyu, S. Yan*, X. Chen, X. Wu, X. Xu, F. Gao), (WOS: 000861191800001).

[31] “A generalised component method for bolted angle connections”, Journal of Constructional Steel Research, 2022, Vol. 198, pp 107530, (W. Wan, S. Yan*, H. Zhang, K. Rasmussen), (WOS: 000862785500004).

[30] “Behavior of multi-steel reinforced concrete columns with encased steel H-sections”, Engineering Structures, 2022, Vol. 264, pp 114463, (X. Zhao, F. Wen, S. Yan*), (WOS: 000832875700001).

[29] “Experimental investigation of the effect of Lode angle on fracture initiation of steels”, Engineering Fracture Mechanics, 2022, Vol. 271, pp 108637, (X. Liu, S. Yan*, K. Rasmussen, G. Deierlein),(WOS: 000826871300003).

[28] “Verification of void growth-based exponential damage function for ductile crack initiation over the full range of stress triaxialities”, Engineering Fracture Mechanics, 2022, Vol. 269, pp 108571, (X. Liu, S. Yan*, K. Rasmussen, G. Deierlein), (WOS: 000813347400001).

[27] “Generalised Component Method-based finite element analysis of steel frames”, Journal of Constructional Steel Research, 2021, Vol. 187, pp 106949, (S. Yan*, K. Rasmussen), (WOS: 000702736700002). 

[26] “Full-range behaviour of T-stubs with various yield line patterns”, Journal of Constructional Steel Research, 2021, Vol. 186, pp 106919, (X. Zhao, S. He, S. Yan*), (WOS: 000703126800003).

[25] “Full-range behaviour of top-and-seat angle connections”, Journal of Structural Engineering, 2021, Vol. 147, No. 1, pp 04020308, (S. Yan*, L. Jiang, K. Rasmussen, H. Zhang), (WOS: 000590478300023).

[24] “Ductility and fracture models of G20Mn5 cast steel”, Journal of Constructional Steel Research, 2020, Vol. 175, pp 106363, (S. Yan, X. Zhao*, P. He), (WOS: 000579836500030).

[23] “Analysis and design of cold-formed steel storage rack uprights under localised fires”, Structures, 2020, Vol. 27, pp 2082~2095, (C. Ren, P. Zhang, S. Yan, L. Dai*), (WOS: 000570182300003).

[22] “System reliability-based limit state design of support scaffolding systems”, Engineering Structures, 2020, Vol. 216, pp 110677, (C. Wang, H. Zhang, K. Rasmussen, J. Reynolds, S. Yan*), (WOS: 000539276800049).

[21] “Experimental evaluation of the full-range behaviour of steel beam-to-column connections”, Advanced Steel Construction, 2020, Vol. 16, No. 1, pp 77~84, (S. Yan*, K. Rasmussen, L. Jiang, C. Zhu, H. Zhang), (WOS: 000518017300009).

[20] “Full-range behaviour of double web angle connections”, Journal of Constructional Steel Research, 2020, Vol. 166, pp 105907, (S. Yan*, L. Jiang, K. Rasmussen), (WOS: 000536123900023).

[19] “Behaviour of H-section purlin connections in resisting progressive collapse of roofs”, Engineering Structures, 2019, Vol. 201, pp 109849, (S. Yan*, K. Rasmussen, X. Liu, L. Dai, X. Zhao), (WOS: 000501395300083).

[18] “Experimental full-range behaviour assessment of bolted moment end-plate connections”, Journal of Structural Engineering, 2019, Vol. 145, No. 8, pp 04019079, (C. Zhu, K. Rasmussen, S. Yan*, H. Zhang), (WOS: 000471751700002).

[17] “System-based limit state design criterion for 3D steel frames under wind loads”, Journal of Constructional Steel Research, 2019, Vol. 157, pp 440~449, (W. Liu, H. Zhang, K. Rasmussen, S. Yan*), (WOS: 000469904300034).

[16] “Identification of critical members for progressive collapse analysis of single-layer latticed domes”, Engineering Structures, 2019, Vol. 188, pp 111~120, (S. Yan, X. Zhao*, K. Rasmussen, H. Zhang), (WOS: 000465058200009).

[15] “Reliability calibrations for the design of cold-formed steel portal frames by advanced analysis”, Engineering Structures, 2019, Vol. 182, pp 164~171, (F. Sena Cardoso, H. Zhang, K. Rasmussen, S. Yan*), (WOS: 000457510700014). 

[14] “Generalised Component Model for Structural Steel Joints”, Journal of Constructional Steel Research, 2019, Vol. 153, pp 330~342, (C. Zhu, K. Rasmussen, S. Yan*), (WOS: 000457510200025).

[13] “Simulation of fracture of a tubular X-joint using a shear-modified Gurson-Tvergaard-Needleman model”, Thin-Walled Structures, 2018, Vol. 132, pp 120~135, (J. Liu, S. Yan, X. Zhao*), (WOS: 000449569000011)

[12] “A new type of truss joint for prevention of progressive collapse”, Engineering Structures, 2018, Vol. 167, pp 203~213, (S. Yan, X. Zhao*, Y Chen, Z. Xu, Y. Lu), (WOS: 000434238900018). 

[11] “A fracture criterion for fracture simulation of ductile metals based on micro-mechanisms”, Theoretical and Applied Fracture Mechanics, 2018, Vol. 95, pp 127~142, (S. Yan, X. Zhao*), (WOS: 000436212300009). 

[10] “Ductile fracture simulation of constructional steels based on yield-to-fracture stress-strain relationship and micro-mechanism based fracture criterion”, Journal of Structural Engineering, 2018, Vol. 144, No. 3, pp 04018004, (S. Yan, X. Zhao*, A. Wu), (WOS: 000422886400010).

[9] “Monitoring a progressive collapse test of a spherical lattice shell using high-speed videogrammetry”, The Photogrammetric Record, 2017, Vol. 32, No. 159, pp 230~254, (X. Tong*, S. Gao, S. Liu, Z. Ye, P. Chen, S. Yan, X. Zhao, L. Du, X. Liu, K. Luan), (WOS: 000411359800004).

[8] “Collapse-resisting mechanisms of planar trusses following sudden member loss”, Journal of Structural Engineering, 2017, Vol. 143, No. 9, pp 04017114, (S. Yan, X. Zhao*, Y. Lu), (WOS: 000415376800037).

[7] “Experimental study on progressive collapse-resistant behavior of planar trusses”, Engineering Structures, 2017, Vol. 135, pp 104~116, (X. Zhao*, S. Yan, Y Chen, Z. Xu, Y. Lu), (WOS: 000394191000009).

[6] “Comparison of progressive collapse resistance of single-layer latticed domes under different loadings”, Journal of Constructional Steel Research, 2017, Vol. 129, pp 204~214, (X. Zhao*, S. Yan, Y. Chen), (WOS: 000392782100018).

[5] “Experimental investigation on overall single-layer folded-plate space grid frame model of the Shenyang Culture and Art Center”, Journal of Building Structures, 2017, Vol. 38. No. 1, pp 42~51, (X. Zhao*, S. Yan, Y. Chen, Y. Lin), (in Chinese, EI index). (AN: 20170903385405).

[4] “Progressive collapse test of a space frame structure”, Journal of Building Structures, 2016, Vol. 37, No. 6, pp 1~8, (X. Zhao*, S. Yan, Y. Chen), (in Chinese, EI index), (AN: 20162702563933).

[3] “Research and application of beam string structures”, Structural Engineering International: Journal of IABSE, 2015, Vol. 25, No. 1, pp 26~33, (X. Zhao*, S. Yan, Z. Xu, A. Wu), (WOS: 000350538400005).

[2] “A review on the progressive collapse study for large-span space structures”, Journal of Building Structures, 2013, Vol. 34, No. 4, pp 1~14, (X. Zhao*, S. Yan, Y. Chen), (in Chinese, EI index), (AN: 20131716238716）.

[1] “Experimental study of complex multi-planar tubular joints”, Engineering Mechanics, 2010, Vol. 27, No. s2, pp 207~211, (X. Zhao, X. Xu*, S. Yan, B. Wang, Y. Chen, Z. Fan, et al), (in Chinese, EI index), (AN: 20110313592447).

* indicates corresponding author